The battery lock on the Revv1 EVO model bike can be adjusted for a tighter or looser fit on the frame. This article will explain how this easy adjustment can be made.

Battery fit check

Before looking at adjusting the fit of the battery it would be good to test if this is needed on your bike. To do this you can simply push on the top of the battery to see if the battery is able to shift down in the mount. After pushing the battery all the way down, see if you are able to pull it off the bike without using the key. If the battery is able to come out, you will need to adjust the mount for a tighter fit. 

Battery fit check

Step 1: Remove the battery mount

The battery mount will have to be removed from the frame to access the adjustment bolts. To do this, remove the three bolts in the center of the mount. 

Remove the battery mount

Step 2: Adjust the lock side

With the battery mount removed, you will be able to access the 4 bolts that hold the lock onto the mount from the back side. These bolts can be loosened and the lock can be slid up or down for a looser or tighter fit. 

Adjust the lock

This adjustment is very easy to do but is also vital to safely ride the bike. If you run into any issues along the way, feel free to reach out to our knowledgeable customer support team for further help.